I figured it out!!!!!!!!!!!!!!!
Step 1 First normally boot up. Sign into a network. Allow it to check connection. Then when it askes u to verify your account, press the back button until you get back to networking. Choose a different network, type a bunch of random letters/numbers then press show password select it, press assist. Then google will open. Search for settings. From settings go to backup/reset. Reset the device. Boot normally once again.
Step 2 You will be asked to verify again. Turn your device off. Reboot into safe-mode. Then re-bypass into settings. Head to device info. Enable developer mode. (press build number 7 times) You cant enable dev mode unless your in safe mode as there is protection for it. Once you have dev mode enabled you need to turn on usb debugging and OEM unlock. WHATEVER U DO DONT PRESS THE HOME BUTTON, IF IT WORKS ALL OF THE SETTINGS WILL BE UNAPPLIED AND SETUP WILL RESTART
Step 3 Now reboot to recovery. (Poweroff, then hold the volume up button while turning the device back on) Next we need to scroll to Press the power button to select it. You will boot into fastboot. Now you will need a pc... First lets check if OEM unlocking is enabled. Run
fastboot flashing get_unlock_ability From CMD/TERMINAL (You have to have adb/fastboot installed) You will get
(bootloader) unlock_ability = 0 If it isn't enabled
BUT if it is you will get
(bootloader) unlock_ability = 1XXXXXXX
If it's enabled we have to unlock the bootloader. THIS WILL VOID YOUR WARRANTY We have to do this as, OEM unlock isn't really enabled. What we've done is made it so the the system see that it's both enabled and disabled. This means the only command that will work is
fastboot oem unlock Were going to run this command. When you do, spam the volume up button to select yes. Now we're almost done. We have to unlock it from flashing too, and unlock system critical (In the security update from 2016 the FRP partition was marked as critical and unless we unlock critical partitions the FRP lock won't ever go away)
First Flashing Unlock Run
fastboot flashing unlock Spam the volume up again Then run
fastboot flashing unlock_critical Spam volume up again Now close adb/fastboot on your pc. And unplug your device. Since security is still enabled
fastboot reboot doesn't work. So we have to wait for the device to drain completely. Then charge it a bit and turn it back on. It will wipe the FRP partiton alone with all the other ones, except for the /boot partition.
FRP is disabled.
This will work on any android device. Did this from a RCA tablet, so it does XD Good Luck and Happy adb'ing :)
EDIT: Works on device with fastboot.... got a bit to excited that i found a bypass for FRP, which has been a issue of mine for a while.