Comment activer l'attache USB sur un périphérique jellybean? -- 4.1-jelly-bean domaine et usb-tethering domain android en relation problème

How do I enable USB tethering on a JellyBean device?



5
vote

problème

français

Jellybean supporte-t-il l'attache USB?

Y a-t-il une façon de compiler la source JB afin que l'attache USB soit toujours activée? J'aimerais avoir le support via le système d'exploitation et ne pas dépendre d'une application.

langue Anglaise

Does JellyBean support USB tether?

Is there a way compile the JB source so USB tether is always enabled? I would like to have the support through the OS and not depend on an App.

     

Liste de réponses

6
 
vote

oui.

sur ICS Le réglage peut être trouvé à

Settings -> Wireless & Networks -> More.. -> Tethering & portable hotspot -> USB tethering

Je pense que cela devrait être au même endroit sur la gelée haricot. Notez que vous avez besoin d'un périphérique avec une puce de données cellulaire pour cette fonctionnalité. Dispositifs sans (par ex. Le Nexus 7) ne montrera pas cette option.

Le support technique USB a été ajouté avec la version 2.2 (Froyo)

 

Yes.

On ICS the setting can be found at

Settings -> Wireless & Networks -> More.. -> Tethering & portable hotspot -> USB tethering

I think it should be at the same place on Jelly Bean. Note that you need a device with a cellular data chip for this feature. Devices without (e.g. the Nexus 7) won't show this option.

USB tethering support was added with the 2.2 (Froyo) release

 
 
         
         
2
 
vote
vote
Meilleure réponse
 

je me suis natif USB tethering avec succès à travailler sur le Nexus 7 avec Jelly Bean.

Modifier le périphérique / ASUS / GRAPER / superposition / CADRES / BASE / CORE / RES / RES / VALATE / CONFIG.XML Pour être les suivants:

<?xml version="1.0" encoding="utf-8"?> <!-- /* ** Copyright 2009, The Android Open Source Project ** ** Licensed under the Apache License, Version 2.0 (the "License"); ** you may not use this file except in compliance with the License. ** You may obtain a copy of the License at ** ** http://www.apache.org/licenses/LICENSE-2.0 ** ** Unless required by applicable law or agreed to in writing, software ** distributed under the License is distributed on an "AS IS" BASIS, ** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. ** See the License for the specific language governing permissions and ** limitations under the License. */ --> <!-- These resources are around just to allow their values to be customized for different hardware and product builds. --> <resources> <!-- Flag indicating whether we should enable the automatic brightness in Settings. config_hardware_automatic_brightness_available is not set, so we will use software implementation --> <bool name="config_automatic_brightness_available">true</bool> <!-- There is no charging LED. --> <bool name="config_unplugTurnsOnScreen">true</bool> <!-- Our amoled doesn't animate well. --> <bool name="config_animateScreenLights">false</bool> <!-- disable menu hard key on Crespo in non-pattern lockscreen --> <bool name="config_disableMenuKeyInLockScreen">true</bool> <!-- Array of light sensor LUX values to define our levels for auto backlight brightness support. The N entries of this array define N + 1 zones as follows: Zone 0: 0 <= LUX < array[0] Zone 1: array[0] <= LUX < array[1] ... Zone N: array[N - 1] <= LUX < array[N] Zone N + 1: array[N] <= LUX < infinity Must be overridden in platform specific overlays --> <integer-array name="config_autoBrightnessLevels"> <item>7</item> <item>94</item> <item>208</item> <item>458</item> <item>2223</item> </integer-array> <!-- Array of output values for LCD backlight corresponding to the LUX values in the config_autoBrightnessLevels array. This array should have size one greater than the size of the config_autoBrightnessLevels array. --> <integer-array name="config_autoBrightnessLcdBacklightValues"> <item>10</item> <item>35</item> <item>55</item> <item>70</item> <item>70</item> <item>250</item> </integer-array> <!-- Array of output values for button backlight corresponding to the LUX values in the config_autoBrightnessLevels array. This array should have size one greater than the size of the config_autoBrightnessLevels array. --> <integer-array name="config_autoBrightnessButtonBacklightValues"> <item>255</item> <item>255</item> <item>255</item> <item>0</item> <item>0</item> <item>0</item> </integer-array> <!-- Array of output values for keyboard backlight corresponding to the LUX values in the config_autoBrightnessLevels array. This array should have size one greater than the size of the config_autoBrightnessLevels array. Crespo has no keyboard so all values are zero. --> <integer-array name="config_autoBrightnessKeyboardBacklightValues"> <item>0</item> <item>0</item> <item>0</item> <item>0</item> <item>0</item> <item>0</item> </integer-array> <!-- Minimum screen brightness allowed by the power manager. --> <integer name="config_screenBrightnessDim">10</integer> <!-- Component name of the default wallpaper. This will be ImageWallpaper if not specified --> <string name="default_wallpaper_component">com.android.wallpaper/.nexus.NexusWallpaper</string> <integer name="config_deskDockKeepsScreenOn">0</integer> <integer name="config_carDockKeepsScreenOn">1</integer> <!-- Default color for notification LED is white --> <color name="config_defaultNotificationColor">#ffffffff</color> <!-- Default blink frequency for notification LED is 9 seconds. --> <integer name="config_defaultNotificationLedOff">9000</integer> <!-- Package name providing network location support. --> <string name="config_networkLocationProviderPackageName" translatable="false">com.google.android.location</string> <!-- Package name providing geocoder API support. --> <string name="config_geocodeProviderPackageName" translatable="false">com.google.android.location</string> <!-- XXXXX NOTE THE FOLLOWING RESOURCES USE THE WRONG NAMING CONVENTION. Please don't copy them, copy anything else. --> <!-- This string array should be overridden by the device to present a list of network attributes. This is used by the connectivity manager to decide which networks can coexist based on the hardware --> <!-- An Array of "[Connection name],[ConnectivityManager connection type], [associated radio-type],[priority],[restoral-timer(ms)],[dependencyMet] --> <!-- the 5th element "resore-time" indicates the number of milliseconds to delay before automatically restore the default connection. Set -1 if the connection does not require auto-restore. --> <!-- the 6th element indicates boot-time dependency-met value. --> <string-array translatable="false" name="networkAttributes"> <item>"wifi,1,1,1,-1,true"</item> <item>"mobile,0,0,0,-1,true"</item> <item>"mobile_mms,2,0,2,60000,true"</item> <item>"mobile_supl,3,0,2,60000,true"</item> <item>"mobile_dun,4,0,4,60000,true"</item> <item>"mobile_hipri,5,0,3,60000,true"</item> <item>"bluetooth,7,7,0,-1,true"</item> </string-array> <!-- This string array should be overridden by the device to present a list of radio attributes. This is used by the connectivity manager to decide which networks can coexist based on the hardware --> <!-- An Array of "[ConnectivityManager connectionType], [# simultaneous connection types]" --> <string-array translatable="false" name="radioAttributes"> <item>"1,1"</item> <item>"0,1"</item> <item>"7,1"</item> </string-array> <!-- List of regexpressions describing the interface (if any) that represent tetherable USB interfaces. If the device doesn't want to support tething over USB this should be empty. An example would be "usb.*" --> <string-array translatable="false" name="config_tether_usb_regexs"> <item>"rndis0"</item> </string-array> <!-- Array of allowable ConnectivityManager network types for tethering --> <!-- Common options are [1, 4] for wifi and dun or [0,1,5,7] for --> <!-- mobile, wifi, hipri and bluetooth --> <integer-array translatable="false" name="config_tether_upstream_types"> <item>0</item> <item>1</item> <item>5</item> <item>7</item> </integer-array> <!-- List of regexpressions describing the interface (if any) that represent tetherable Wifi interfaces. If the device doesn't want to support tethering over Wifi this should be empty. An example would be "softap.*" --> <string-array translatable="false" name="config_tether_wifi_regexs"> <item>"wlan0"</item> </string-array> <!-- List of regexpressions describing the interface (if any) that represent tetherable bluetooth interfaces. If the device doesn't want to support tethering over bluetooth this should be empty. --> <string-array translatable="false" name="config_tether_bluetooth_regexs"> <item>"bnep\d"</item> </string-array> <!-- Vibrator pattern for a very short but reliable vibration for soft keyboard tap --> <integer-array name="config_keyboardTapVibePattern"> <item>30</item> </integer-array> <!-- Vibrator pattern for feedback about booting with safe mode disabled --> <integer-array name="config_safeModeDisabledVibePattern"> <item>1</item> </integer-array> <!-- crespo doesn't handle this blur effect very quickly. --> <bool name="config_sf_slowBlur">true</bool> <!-- Boolean indicating if restoring network selection should be skipped --> <!-- The restoring is handled by modem if it is true --> <bool translatable="false" name="skip_restoring_network_selection">true</bool> <!-- Specifies the amount of time to disable virtual keys after the screen is touched in order to filter out accidental virtual key presses due to swiping gestures or taps near the edge of the display. May be 0 to disable the feature. It is recommended that this value be no more than 250 ms. This feature should be disabled for most devices. --> <integer name="config_virtualKeyQuietTimeMillis">250</integer> <!-- Boolean indicating if current platform supports bluetooth wide band speech --> <bool name="config_bluetooth_wide_band_speech">false</bool> <bool name="config_ui_enableFadingMarquee">false</bool> <!-- The attenuation in dB applied to the sound effects played through AudioManager.playSoundEffect() when no volume is specified. --> <integer name="config_soundEffectVolumeDb">-12</integer> <string-array name="config_usbHostBlacklist"> <item>/dev/bus/usb/001</item> </string-array> <bool name="config_showNavigationBar">true</bool> </resources>

Modifier out / cible / produit / grouper / root / init.usb.rc doit être le suivant:

# Copyright (C) 2012 The Android Open Source Project # # USB configuration common for all android devices # on post-fs-data chown system system /sys/class/android_usb/android0/f_mass_storage/lun/file chmod 0660 /sys/class/android_usb/android0/f_mass_storage/lun/file chown system system /sys/class/android_usb/android0/f_rndis/ethaddr chmod 0660 /sys/class/android_usb/android0/f_rndis/ethaddr # Used to disable USB when switching states on property:sys.usb.config=none stop adbd write /sys/class/android_usb/android0/enable 0 write /sys/class/android_usb/android0/bDeviceClass 0 setprop sys.usb.state ${sys.usb.config} # adb only USB configuration # This should only be used during device bringup # and as a fallback if the USB manager fails to set a standard configuration on property:sys.usb.config=adb write /sys/class/android_usb/android0/enable 0 write /sys/class/android_usb/android0/idVendor 18d1 write /sys/class/android_usb/android0/idProduct D002 write /sys/class/android_usb/android0/functions ${sys.usb.config} write /sys/class/android_usb/android0/enable 1 start adbd setprop sys.usb.state ${sys.usb.config} # USB accessory configuration on property:sys.usb.config=accessory write /sys/class/android_usb/android0/enable 0 write /sys/class/android_usb/android0/idVendor 18d1 write /sys/class/android_usb/android0/idProduct 2d00 write /sys/class/android_usb/android0/functions ${sys.usb.config} write /sys/class/android_usb/android0/enable 1 setprop sys.usb.state ${sys.usb.config} # USB accessory configuration, with adb on property:sys.usb.config=accessory,adb write /sys/class/android_usb/android0/enable 0 write /sys/class/android_usb/android0/idVendor 18d1 write /sys/class/android_usb/android0/idProduct 2d01 write /sys/class/android_usb/android0/functions ${sys.usb.config} write /sys/class/android_usb/android0/enable 1 start adbd setprop sys.usb.state ${sys.usb.config} # audio accessory configuration on property:sys.usb.config=audio_source write /sys/class/android_usb/android0/enable 0 write /sys/class/android_usb/android0/idVendor 18d1 write /sys/class/android_usb/android0/idProduct 2d02 write /sys/class/android_usb/android0/functions ${sys.usb.config} write /sys/class/android_usb/android0/enable 1 setprop sys.usb.state ${sys.usb.config} # audio accessory configuration, with adb on property:sys.usb.config=audio_source,adb write /sys/class/android_usb/android0/enable 0 write /sys/class/android_usb/android0/idVendor 18d1 write /sys/class/android_usb/android0/idProduct 2d03 write /sys/class/android_usb/android0/functions ${sys.usb.config} write /sys/class/android_usb/android0/enable 1 start adbd setprop sys.usb.state ${sys.usb.config} # USB and audio accessory configuration on property:sys.usb.config=accessory,audio_source write /sys/class/android_usb/android0/enable 0 write /sys/class/android_usb/android0/idVendor 18d1 write /sys/class/android_usb/android0/idProduct 2d04 write /sys/class/android_usb/android0/functions ${sys.usb.config} write /sys/class/android_usb/android0/enable 1 setprop sys.usb.state ${sys.usb.config} # USB and audio accessory configuration, with adb on property:sys.usb.config=accessory,audio_source,adb write /sys/class/android_usb/android0/enable 0 write /sys/class/android_usb/android0/idVendor 18d1 write /sys/class/android_usb/android0/idProduct 2d05 write /sys/class/android_usb/android0/functions ${sys.usb.config} write /sys/class/android_usb/android0/enable 1 start adbd setprop sys.usb.state ${sys.usb.config} # Used to set USB configuration at boot and to switch the configuration # when changing the default configuration on property:persist.sys.usb.config=* setprop sys.usb.config ${persist.sys.usb.config} on property:sys.usb.config=rndis write /sys/class/android_usb/android0/enable 0 write /sys/class/android_usb/android0/idVendor 18d1 write /sys/class/android_usb/android0/idProduct 4e23 write /sys/class/android_usb/android0/functions ${sys.usb.config} write /sys/class/android_usb/android0/bDeviceClass 224 write /sys/class/android_usb/android0/enable 1 setprop sys.usb.state ${sys.usb.config} on property:sys.usb.config=rndis,adb write /sys/class/android_usb/android0/enable 0 write /sys/class/android_usb/android0/idVendor 18d1 write /sys/class/android_usb/android0/idProduct 4e24 write /sys/class/android_usb/android0/functions ${sys.usb.config} write /sys/class/android_usb/android0/bDeviceClass 224 write /sys/class/android_usb/android0/enable 1 start adbd setprop sys.usb.state ${sys.usb.config}

et utiliser un noyau Tegra modifié qui a activé RNDIS.

S'il vous plaît référence Cet article XDA

 

I successfully got native USB tethering working on the Nexus 7 with Jelly Bean.

Modify the device/asus/grouper/overlay/frameworks/base/core/res/res/values/config.xml to be the following:

<?xml version="1.0" encoding="utf-8"?> <!-- /* ** Copyright 2009, The Android Open Source Project ** ** Licensed under the Apache License, Version 2.0 (the "License"); ** you may not use this file except in compliance with the License. ** You may obtain a copy of the License at ** **     http://www.apache.org/licenses/LICENSE-2.0 ** ** Unless required by applicable law or agreed to in writing, software ** distributed under the License is distributed on an "AS IS" BASIS, ** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. ** See the License for the specific language governing permissions and ** limitations under the License. */ -->  <!-- These resources are around just to allow their values to be customized      for different hardware and product builds. --> <resources>     <!-- Flag indicating whether we should enable the automatic brightness in Settings.      config_hardware_automatic_brightness_available is not set, so we will use software implementation -->     <bool name="config_automatic_brightness_available">true</bool>      <!-- There is no charging LED. -->     <bool name="config_unplugTurnsOnScreen">true</bool>      <!-- Our amoled doesn't animate well. -->     <bool name="config_animateScreenLights">false</bool>      <!-- disable menu hard key on Crespo in non-pattern lockscreen -->     <bool name="config_disableMenuKeyInLockScreen">true</bool>      <!-- Array of light sensor LUX values to define our levels for auto backlight brightness support.      The N entries of this array define N + 1 zones as follows:       Zone 0:        0 <= LUX < array[0]      Zone 1:        array[0] <= LUX < array[1]      ...      Zone N:        array[N - 1] <= LUX < array[N]      Zone N + 1:    array[N] <= LUX < infinity       Must be overridden in platform specific overlays -->     <integer-array name="config_autoBrightnessLevels">     <item>7</item>     <item>94</item>     <item>208</item>     <item>458</item>     <item>2223</item>     </integer-array>      <!-- Array of output values for LCD backlight corresponding to the LUX values      in the config_autoBrightnessLevels array.  This array should have size one greater      than the size of the config_autoBrightnessLevels array.     -->     <integer-array name="config_autoBrightnessLcdBacklightValues">     <item>10</item>     <item>35</item>     <item>55</item>     <item>70</item>     <item>70</item>     <item>250</item>     </integer-array>      <!-- Array of output values for button backlight corresponding to the LUX values      in the config_autoBrightnessLevels array.  This array should have size one greater      than the size of the config_autoBrightnessLevels array.     -->     <integer-array name="config_autoBrightnessButtonBacklightValues">     <item>255</item>     <item>255</item>     <item>255</item>     <item>0</item>     <item>0</item>     <item>0</item>     </integer-array>      <!-- Array of output values for keyboard backlight corresponding to the LUX values      in the config_autoBrightnessLevels array.  This array should have size one greater      than the size of the config_autoBrightnessLevels array.      Crespo has no keyboard so all values are zero.     -->     <integer-array name="config_autoBrightnessKeyboardBacklightValues">     <item>0</item>     <item>0</item>     <item>0</item>     <item>0</item>     <item>0</item>     <item>0</item>     </integer-array>      <!-- Minimum screen brightness allowed by the power manager. -->     <integer name="config_screenBrightnessDim">10</integer>      <!-- Component name of the default wallpaper. This will be ImageWallpaper if not       specified -->     <string name="default_wallpaper_component">com.android.wallpaper/.nexus.NexusWallpaper</string>      <integer name="config_deskDockKeepsScreenOn">0</integer>     <integer name="config_carDockKeepsScreenOn">1</integer>      <!-- Default color for notification LED is white -->     <color name="config_defaultNotificationColor">#ffffffff</color>      <!-- Default blink frequency for notification LED is 9 seconds. -->     <integer name="config_defaultNotificationLedOff">9000</integer>      <!-- Package name providing network location support. -->     <string name="config_networkLocationProviderPackageName" translatable="false">com.google.android.location</string>      <!-- Package name providing geocoder API support. -->     <string name="config_geocodeProviderPackageName" translatable="false">com.google.android.location</string>      <!-- XXXXX NOTE THE FOLLOWING RESOURCES USE THE WRONG NAMING CONVENTION.      Please don't copy them, copy anything else. -->      <!-- This string array should be overridden by the device to present a list of network      attributes.  This is used by the connectivity manager to decide which networks can coexist      based on the hardware -->     <!-- An Array of "[Connection name],[ConnectivityManager connection type],      [associated radio-type],[priority],[restoral-timer(ms)],[dependencyMet]  -->     <!-- the 5th element "resore-time" indicates the number of milliseconds to delay      before automatically restore the default connection.  Set -1 if the connection      does not require auto-restore. -->     <!-- the 6th element indicates boot-time dependency-met value. -->     <string-array translatable="false" name="networkAttributes">     <item>"wifi,1,1,1,-1,true"</item>     <item>"mobile,0,0,0,-1,true"</item>     <item>"mobile_mms,2,0,2,60000,true"</item>     <item>"mobile_supl,3,0,2,60000,true"</item>     <item>"mobile_dun,4,0,4,60000,true"</item>     <item>"mobile_hipri,5,0,3,60000,true"</item>     <item>"bluetooth,7,7,0,-1,true"</item>     </string-array>      <!-- This string array should be overridden by the device to present a list of radio      attributes.  This is used by the connectivity manager to decide which networks can coexist      based on the hardware -->     <!-- An Array of "[ConnectivityManager connectionType],                   [# simultaneous connection types]"  -->     <string-array translatable="false" name="radioAttributes">     <item>"1,1"</item>     <item>"0,1"</item>     <item>"7,1"</item>     </string-array>      <!-- List of regexpressions describing the interface (if any) that represent tetherable      USB interfaces.  If the device doesn't want to support tething over USB this should      be empty.  An example would be "usb.*" -->     <string-array translatable="false" name="config_tether_usb_regexs">     <item>"rndis0"</item>     </string-array>      <!-- Array of allowable ConnectivityManager network types for tethering -->     <!-- Common options are [1, 4] for wifi and dun or [0,1,5,7] for -->     <!-- mobile, wifi, hipri and bluetooth -->     <integer-array translatable="false" name="config_tether_upstream_types">     <item>0</item>     <item>1</item>     <item>5</item>     <item>7</item>     </integer-array>      <!-- List of regexpressions describing the interface (if any) that represent tetherable      Wifi interfaces.  If the device doesn't want to support tethering over Wifi this      should be empty.  An example would be "softap.*" -->     <string-array translatable="false" name="config_tether_wifi_regexs">     <item>"wlan0"</item>     </string-array>      <!-- List of regexpressions describing the interface (if any) that represent tetherable      bluetooth interfaces.  If the device doesn't want to support tethering over bluetooth this      should be empty. -->     <string-array translatable="false" name="config_tether_bluetooth_regexs">     <item>"bnep\\d"</item>     </string-array>      <!-- Vibrator pattern for a very short but reliable vibration for soft keyboard tap -->     <integer-array name="config_keyboardTapVibePattern">     <item>30</item>     </integer-array>      <!-- Vibrator pattern for feedback about booting with safe mode disabled -->     <integer-array name="config_safeModeDisabledVibePattern">     <item>1</item>     </integer-array>      <!-- crespo doesn't handle this blur effect very quickly. -->     <bool name="config_sf_slowBlur">true</bool>       <!-- Boolean indicating if restoring network selection should be skipped -->     <!-- The restoring is handled by modem if it is true -->     <bool translatable="false" name="skip_restoring_network_selection">true</bool>      <!-- Specifies the amount of time to disable virtual keys after the screen is touched      in order to filter out accidental virtual key presses due to swiping gestures      or taps near the edge of the display.  May be 0 to disable the feature.      It is recommended that this value be no more than 250 ms.      This feature should be disabled for most devices. -->     <integer name="config_virtualKeyQuietTimeMillis">250</integer>      <!-- Boolean indicating if current platform supports bluetooth wide band      speech -->     <bool name="config_bluetooth_wide_band_speech">false</bool>      <bool name="config_ui_enableFadingMarquee">false</bool>      <!-- The attenuation in dB applied to the sound effects played      through AudioManager.playSoundEffect() when no volume is specified. -->     <integer name="config_soundEffectVolumeDb">-12</integer>  <string-array name="config_usbHostBlacklist">      <item>/dev/bus/usb/001</item>      </string-array>  <bool name="config_showNavigationBar">true</bool>  </resources> 

Modify out/target/product/grouper/root/init.usb.rc to be the following:

# Copyright (C) 2012 The Android Open Source Project # # USB configuration common for all android devices #  on post-fs-data     chown system system /sys/class/android_usb/android0/f_mass_storage/lun/file     chmod 0660 /sys/class/android_usb/android0/f_mass_storage/lun/file     chown system system /sys/class/android_usb/android0/f_rndis/ethaddr     chmod 0660 /sys/class/android_usb/android0/f_rndis/ethaddr  # Used to disable USB when switching states on property:sys.usb.config=none     stop adbd     write /sys/class/android_usb/android0/enable 0     write /sys/class/android_usb/android0/bDeviceClass 0     setprop sys.usb.state ${sys.usb.config}  # adb only USB configuration # This should only be used during device bringup # and as a fallback if the USB manager fails to set a standard configuration on property:sys.usb.config=adb     write /sys/class/android_usb/android0/enable 0     write /sys/class/android_usb/android0/idVendor 18d1     write /sys/class/android_usb/android0/idProduct D002     write /sys/class/android_usb/android0/functions ${sys.usb.config}     write /sys/class/android_usb/android0/enable 1     start adbd     setprop sys.usb.state ${sys.usb.config}  # USB accessory configuration on property:sys.usb.config=accessory     write /sys/class/android_usb/android0/enable 0     write /sys/class/android_usb/android0/idVendor 18d1     write /sys/class/android_usb/android0/idProduct 2d00     write /sys/class/android_usb/android0/functions ${sys.usb.config}     write /sys/class/android_usb/android0/enable 1     setprop sys.usb.state ${sys.usb.config}  # USB accessory configuration, with adb on property:sys.usb.config=accessory,adb     write /sys/class/android_usb/android0/enable 0     write /sys/class/android_usb/android0/idVendor 18d1     write /sys/class/android_usb/android0/idProduct 2d01     write /sys/class/android_usb/android0/functions ${sys.usb.config}     write /sys/class/android_usb/android0/enable 1     start adbd     setprop sys.usb.state ${sys.usb.config}  # audio accessory configuration on property:sys.usb.config=audio_source     write /sys/class/android_usb/android0/enable 0     write /sys/class/android_usb/android0/idVendor 18d1     write /sys/class/android_usb/android0/idProduct 2d02     write /sys/class/android_usb/android0/functions ${sys.usb.config}     write /sys/class/android_usb/android0/enable 1     setprop sys.usb.state ${sys.usb.config}  # audio accessory configuration, with adb on property:sys.usb.config=audio_source,adb     write /sys/class/android_usb/android0/enable 0     write /sys/class/android_usb/android0/idVendor 18d1     write /sys/class/android_usb/android0/idProduct 2d03     write /sys/class/android_usb/android0/functions ${sys.usb.config}     write /sys/class/android_usb/android0/enable 1     start adbd     setprop sys.usb.state ${sys.usb.config}  # USB and audio accessory configuration on property:sys.usb.config=accessory,audio_source     write /sys/class/android_usb/android0/enable 0     write /sys/class/android_usb/android0/idVendor 18d1     write /sys/class/android_usb/android0/idProduct 2d04     write /sys/class/android_usb/android0/functions ${sys.usb.config}     write /sys/class/android_usb/android0/enable 1     setprop sys.usb.state ${sys.usb.config}  # USB and audio accessory configuration, with adb on property:sys.usb.config=accessory,audio_source,adb     write /sys/class/android_usb/android0/enable 0     write /sys/class/android_usb/android0/idVendor 18d1     write /sys/class/android_usb/android0/idProduct 2d05     write /sys/class/android_usb/android0/functions ${sys.usb.config}     write /sys/class/android_usb/android0/enable 1     start adbd     setprop sys.usb.state ${sys.usb.config}  # Used to set USB configuration at boot and to switch the configuration # when changing the default configuration on property:persist.sys.usb.config=*     setprop sys.usb.config ${persist.sys.usb.config}  on property:sys.usb.config=rndis     write /sys/class/android_usb/android0/enable 0     write /sys/class/android_usb/android0/idVendor 18d1     write /sys/class/android_usb/android0/idProduct 4e23     write /sys/class/android_usb/android0/functions ${sys.usb.config}     write /sys/class/android_usb/android0/bDeviceClass 224     write /sys/class/android_usb/android0/enable 1     setprop sys.usb.state ${sys.usb.config}  on property:sys.usb.config=rndis,adb     write /sys/class/android_usb/android0/enable 0     write /sys/class/android_usb/android0/idVendor 18d1     write /sys/class/android_usb/android0/idProduct 4e24     write /sys/class/android_usb/android0/functions ${sys.usb.config}     write /sys/class/android_usb/android0/bDeviceClass 224     write /sys/class/android_usb/android0/enable 1     start adbd     setprop sys.usb.state ${sys.usb.config} 

And use a modified tegra kernel that has RNDIS enabled.

Please reference this XDA post

 
 
 
 

Questions connexes

2  Quelles vérifications dois-je passer si mon ordinateur portable ne peut pas se connecter à Internet via Tethering?  ( What checks should i go through if my laptop cant connect to the internet throu ) 
J'ai besoin de connecter mon ordinateur portable à Internet en appuyant sur mon smartphone, j'utilise une galaxie GT-S7270 avec Android 4.2.2, un ordinateur p...

2  Comment limiter les données Télécharger lors de la location  ( How to limit data download when tethering ) 
Lorsque je connecte mon mobile Android à mon ordinateur portable, j'utilise les données 3G via une attache USB. Plusieurs activités de base sur mon ordinateur...

132  Comment mettre en place une attache inversée sur USB?  ( How to set up reverse tethering over usb ) 
Mon téléphone HTC G2 est enraciné et en cours d'exécution CyanogenMod 7 Je n'ai pas de plan de données. Parfois, je veux connecter le téléphone à Interne...

1  Configuration manuelle de thertiner USB avec racine  ( Configuring usb tethering manually with root ) 
J'ai épuisé les méthodes documentées de Permettre par programmation sur l'attache USB : Le service ne fonctionne pas sur mon téléphone (Samsung Note 4)...

85  Comment utiliser Internet Windows sur le téléphone Android via un câble USB  ( How to use windows internet on android phone through usb cable ) 
J'utilise Android 4.4.2 (sur Micromax Unite 2 - A106 ). J'ai un PC Windows à la maison qui a une connexion Internet haut débit haute bande. Je n'ai pas de ro...

0  Bypass de détection d'attache Android ne fonctionne pas sur Samsung Galaxy S8  ( Android tether detection bypass not working on samsung galaxy s8 ) 
J'ai défini Dun à 0 avec settings put global tether_dun_required 0 sur ma galaxie S8 pendant quelques mois maintenant et ça a fonctionné super. Au cours des...

5  Comment activer l'attache USB sur un périphérique jellybean?  ( How do i enable usb tethering on a jellybean device ) 
Jellybean supporte-t-il l'attache USB? Y a-t-il une façon de compiler la source JB afin que l'attache USB soit toujours activée? J'aimerais avoir le support...

2  Comment puis-je accéder à un périphérique attaché USB de WiFi Hotspot?  ( How can i access usb tethered device from wifi hotspot ) 
J'ai donc découvert de manière difficile que l'USB Tether IP est 192.168.52.x et les adresses WiFi sont 192.168.53.x. Mon objectif est de pouvoir accéder au...

1  Partage Internet - Ubuntu  ( Internet sharing ubuntu ) 
J'ai un smartphone (d'un fabricant local). Il a une option disant «Internet USB» avec description 'Partage de Windows PC Internet via un câble USB'. Ma prem...

13  Activer automatiquement l'attache USB lorsque le périphérique est branché sur un PC  ( Automatically enable usb tethering when device is plugged into a pc ) 
Je couronne Android guimauve sur un Nexus 5. Je l'attache à mon ordinateur portable via USB. Existe-t-il un moyen de configurer des choses pour que la cléseri...




© 2022 www.demandez.top All Rights Reserved. Questions et réponses Accueil Tous les droits sont réservés