I am trying to connect my Galaxy Tab to the Internet through an ad-hoc network made via my PC. The PC ad-hoc settings are fine because I can use it from my iPhone and other devices.
J'essaie de connecter mon onglet Galaxy à Internet via un réseau ad-hoc fait via mon PC. Les paramètres ad-hoc PC sont corrects car je peux l'utiliser depuis mon iPhone et d'autres périphériques.
I am trying to connect my Galaxy Tab to the Internet through an ad-hoc network made via my PC. The PC ad-hoc settings are fine because I can use it from my iPhone and other devices.
Android a des problèmes de connexion aux réseaux adhoc. ici est un lien vers un Fixez quelqu'un d'autre ici utilisé pour obtenir sa tablette pour se connecter à un réseau Adhoc. Aussi Ce est le lien vers le fil qu'il a obtenu ses informations.
Android has issues connecting to adhoc networks. Here is a link to a fix someone else here used to get his tablet to connect to a adhoc network. Also this is the link to the thread he got his information from.
Si vous n'utilisez aucune application de routeur virtuel sur votre PC, essayez de courir Ces deux commandes - cela pourrait fonctionner:
netsh wlan set hostednetwork mode=allow ssid=SSIDNAME key=YOURPASSWORD netsh wlan start hostednetwork
Assurez-vous d'exécuter ces commandes dans la commande élevée (administrateur) Invite.
Si vous obtenez une erreur après avoir exécuté la deuxième commande; quelque chose comme - "Le réseau hébergé n'a pas pu être démarré. Le groupe ou la ressource n'est pas dans l'état correct pour effectuer l'opération demandée.", Aller à Device Manager > Network Adaptors
Sélectionnez votre adaptateur réseau, clic droit et sélectionnez Désactiver. Encore une fois, sélectionnez la même chose et activez.
Essayez d'exécuter à nouveau les commandes ci-dessus.
If you are not using any virtual router app on your PC, try running these two commands - it might work:
netsh wlan set hostednetwork mode=allow ssid=SSIDNAME key=YOURPASSWORD netsh wlan start hostednetwork
Make sure you run these commands in elevated (administrator) command prompt.
If you get any error after running the second command; something like - "The hosted network couldn't be started. The group or resource is not in the correct state to perform the requested operation.", go to Device Manager > Network Adaptors
select your network adaptor, right click and select Disable. Again select the same and enable.
Try running both the above commands again.
© 2022 www.demandez.top All Rights Reserved. Questions et réponses Accueil Tous les droits sont réservés